Lot after lot, drafted by people you can actually talk to.
DESIGNADRAFT gives builders and design firms a Moroccan drafting team for volume work: lot-specific plans, mass revisions and repetitive production drawing, at a lower cost than hiring locally. When a project needs more, we bring 3D modelling and project management too.
Half an hour on a call tells you more than any brochure.
Built for volume. Lot after lot, revision after revision.
Production drafting is where most firms run out of hands. We give you a trained team that turns out lot-specific plans, pushes revisions through whole plan sets and takes repetitive drawing off your staff, so you can say yes to more lots for your own clients.
Every lot, from your master plans
Setbacks, plan options, elevations and the sheets each permit set needs, adapted lot by lot and kept consistent across the community.
One change, hundreds of sheets
A code update, a new option or a title-block change carried through every affected sheet, done the same way each time and logged sheet by sheet.
Show us once
We turn your walkthrough into a written checklist our drafters follow, so the work comes back right with minimal training on your side.
| LOT | PLAN | ELEV. | OPTIONS | DRAFTED | CHECKED | STATUS |
|---|---|---|---|---|---|---|
| 214 | Aspen 2450 | B | Garage extension | Mon | Tue | Issued |
| 215 | Cedar 1980 | A | None | Mon | Tue | Issued |
| 216 | Aspen 2450 | C | Covered patio | Tue | Wed | Checked |
| 217 | Birch 3100 | A | Bonus room | Wed | In check | |
| 218 | Cedar 1980 | B | Corner lot setback | Wed | In check | |
| 219 | Aspen 2450 | A | 3-car garage | Drafting |
Scale up for a busy season and back down after, without hiring or layoffs.
Talk about your volumeVolume production first. Specialist work when you need it.
We work to your title blocks, layers, families and standards, not ours. Here is the drawing index.
Lot-specific plans
Each lot drawn from your master plans, with its setbacks, options and elevations, in the format your permit office and site teams expect.
Mass revisions & repetitive tasks
Plan-set updates, standards changes, redline pick-ups and any routine drawing task you can show us once and hand over for good.
2D drafting & shop drawings
Construction documents, shop and fabrication drawings and as-built updates, from sketches, scans or PDFs, clean and layered, ready to issue.
3D modelling & BIM
Building models built to your template, families and level of detail, with sheets and schedules straight out of the model, plus 3D views and animations your sales team can show buyers.
Mechanical & product CAD
Part and assembly models, detail drawings with proper dimensions and tolerances, and bills of materials your workshop can build from.
Project management
One coordinator who plans the batches, tracks deadlines and reports progress, so your team deals with one person instead of a queue of drafters.
Workflow automation
Scripts, templates and batch routines that take the repeatable steps out of your drafting, so each sheet takes less time and comes back sooner. See how it works
Automate what repeats. Keep people on what needs judgment.
Most drafting workflows hide hours of steps a script could do: placing the same blocks, filling title blocks, renaming sheets, plotting sets. We find those steps, automate them and keep our drafters on the parts that need a person. Same quality, quicker turnaround, lower cost per job.
- 01AUTOMATED
Read the lot
Plan, elevation, options and setbacks pulled straight from your lot schedule.
- 02AUTOMATED
Build the set
Master plan placed, option blocks swapped in, sheets created.
- 03DRAFTER
Fit it to the lot
Odd setbacks, corner lots, options that clash: resolved by a person.
- 04AUTOMATED
Fill the paperwork
Title blocks, sheet index, areas and schedules written from the drawing.
- 05CHECKED BY HAND
Check every sheet
Against your checklist, by someone who did not draw it.
- 06AUTOMATED
Issue the set
Batch plotted, named your way and dropped in your shared folder.
scripts do the repeats, people do the thinking and the checking
We learn how you work
A call and a few sample jobs. We list every step, how long it takes and which ones repeat the same way each time.
We automate the repeats
Scripts, templates, smart blocks and batch routines, built inside the software you already use. No new system to learn.
We run it, or hand it over
We use the tools on the work we draft for you, or you take them in-house with written instructions your own team can follow.
Less time per sheet, lower cost per lot, and the same quality and turnaround on every job.
Ask what we can automateHow a project moves, revision by revision.
No account managers between you and the work. You talk to the people drawing it, by email, call or a shared folder, whichever you already use.
- REV 0
Send a sample set
Your master plans, standards, title blocks and a few finished examples of what good looks like to you.
- REV A
Show us once
A short walkthrough call. We write your way of working into a checklist our team follows on every sheet.
- REV B
We produce, then check
Lots and revisions are drafted in batches, and every sheet is checked against your checklist before it leaves the studio.
- REV C
Scale with your pipeline
Add drafters for a busy quarter and scale back when it eases. You keep the same point of contact the whole way.
Morocco has been drawing precise geometry for a thousand years.
The same compass-and-straightedge thinking behind zellige tilework runs through good drafting. We bring it to your drawings, from a country that sits right between your time zones.
Morocco 10:00 to 19:00, others 9:00 to 18:00 local, plotted in UTC, summer
- Same working day as Europe, and your afternoon in the Gulf.
- Up to five shared hours with US East Coast teams, from 9:00 to 14:00 New York time, for calls and same-day answers.
- We work in English, French and Arabic.
Need a specific profile? We find it in Morocco.
Morocco trains architects, engineers and CAD technicians every year, and many never get the chance to work with firms abroad. Tell us the role and the skills. We find and vet the right people, and they work on your projects through DESIGNADRAFT.
- You describe the role
- We shortlist and test
- You interview
- They join your work, through us
Profiles clients ask us to find
- Lot-plan production drafters
- AutoCAD drafters
- Revit and BIM modellers
- Mechanical CAD designers
- Drawing checkers
- Project coordinators
Not on the list? Ask anyway.
Why we stay personal as we grow
We kept meeting excellent drafters in Morocco and busy firms abroad who never found each other. DESIGNADRAFT is our way of closing that gap.
We can grow a team around your workload, from one drafter to a full production group. What does not change: you talk to the people doing the work, and someone on our side owns your project from the first sheet to the last.
So book a call. Tell us what you are working on, ask us anything, and decide from there. That is how good working relationships start.
The DESIGNADRAFT team, Morocco
Let’s talk about your drawings.
Book a 30-minute video call with the studio. We listen to what you need, ask about your standards and deadlines, and tell you honestly whether we are the right fit. No obligation.
You will meet the people who would draw for you.
- hello@designadraft.com
- STUDIO
- Casablanca, Morocco · GMT+1